Rocktron Tri-Wah Bedienungsanleitung PDF herunterladen (Seite 10)

PEDAL ROCKER TENSION ADJUSTMENT - This screw will

allow you to adjust the “action” of the pedal to suit your taste with

a allen wrench (not included). If you would like a tighter or heavier

movement of the pedal using an allen wrench turn the screw

clockwise. This will increase the torque and tension on the rocker

pedal. If you would like a smoother or softer pedal movement turn

the allen screw counter-clockwise. This will loosen the tension on

the pedal pivot point.

9-VOLT ADAPTER INPUT - this 2.55mm coax plug will take a

9V DC adapter (not included) to provide power to the unit. The

adapter power rating should be 20mA. Please follow all instruc-

tions that appear on the bottom of the unit. The Rocktron DC

OnTap adapter (sold seperately) is available from your Rocktron

dealer.

OUTPUT Jack - using a standard guitar cable, plug this output

into the next effect in your effect chain or directly into the input of

your guitar amplifier.

WAH ON LED - This super bright blue LED will be lit when the

“wah” effect is activated. To activate the wah - see point 2. The

blue LED will not be lit when the wah is bypassed.

9-VOLT BATTERY COMPARTMENT - to access pull on small

tab labeled “OPEN”. Replace with a new 9-Volt battery. Always

remember to unplug your guitar cords from the pedal to conserve

battery life. Some battery drain may take place when unit is

plugged in (even if the unit is bypassed).

1 2 ... 5 6 7 8 9 10 11 12 13 14

Keine Kommentare

Rocktron Tri-Wah Bedienungsanleitung Seite 10