Rocktron Utopia G200 Bedienungsanleitung PDF herunterladen (Seite 10)

Press the UP button once to move one preset bank up or press and hold down the button to auto-

scroll UP. Note that once you have reached your desired preset, the preset name on the screen

will be ﬂashing but NOT recalled. The original preset will still be active. Now select any preset

1-3 to recall or activate the desired preset.

10 DOWN button

This button allows you to scroll DOWN through the preset banks and functions in the same man-

ner as the UP button (point 9).

11 PRESET button 1

This button allows you to select presets 1, 4, 7, 10, 13, 16, 19, 22, 25, 28, etc.. When you are in

Bank 01 this button allows you to select preset 4. When you are in Bank 02 this button allows

you to select preset 7 and so on. Note that there is no 0 (zero) preset. When in "2nd" mode, this

button is used to turn On/Off the EFFECT that has been assigned to the preset selected.

12 PRESET button 2

This button allows you to select presets 2, 5, 8, 11, 14, 17, 20, 23, 26, 29, etc. When you are

in Bank 00 this button allows you to select preset 2. When you are in Bank 01 this button al

lows you to select preset 5 and so on. When in "2nd" mode, this button is used to turn On/Off

the MUTE/TUNER Function. This will mute the output of the G200 and allow you to tune in

silence.

13 PRESET button 3

This button allows you to select presets 3, 6, 9, 12, 15, 18, 21, 24, 30, etc. When you are in Bank

00 this button allows you to select preset 3. When you are in Bank 01 this button allows you to

select preset 6 and so on. When in "2nd" mode, this button is used to activate the TAP function

and set the DELAY Rate by tapping the button at the desired rate.

14 2nd Button

This button allows you to enter the 2nd Function Mode. In the 2nd Function Mode you can use

button 1 (EFFECT ON/OFF) to turn on and off a pre-assigned effect within the preset. You can

also access the MUTE/TUNER function using button 2 and set the delay rate within a preset us-

ing the TAP button (button 3). To Exit 2nd Function mode, press the 2nd Button.

15 EXPRESSION PEDAL switch

To activate the Expression pedal, apply pressure to the toe of the expression pedal until this

switch is activated. You will know the pedal is active as you should be able to feel the switch

activate, but if not, the PEDAL ACTIVE LED will light when the switch is turned ON.

16 INPUT jack

This standard, mono 1/4" jack is used to provide input to the unit.

17 OUTPUT RIGHT jack

This 1/4" jack provides the right output of the UTOPIA G200 for use in stereo situations, such as

direct recording, plugging into a PA system, two Guitar ampliﬁers, etc.

3. UTOPIA G200 Top and Back Panels....continued.....

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 79 80

Keine Kommentare

Rocktron Utopia G200 Bedienungsanleitung Seite 10